Processor Modules | Maximum performance and unrivalled robustness

Source: Bachmann System Overview catalog | Bachmann electronic GmbH www.bachmann.info.

The processor modules of the M1 automation system stand out on account of their optimum performance and unrivalled robustness. Integrated into Bachmann CPU boards and I/O systems, industrial Pentium processors in an embedded design ensure absolute deterministic real-time behavior.

Even the most rigorous demands in terms of flexible data exchange and networking can be met without costly additional modules: M1 processor modules offer the full range of interfaces already »on-board«. This offers the automation engineer total freedom and ensures cost efficient and compact design. Ample power reserves for networking and communication-intensive applications are provided as basic features. The mass storage of the device is also fully scalable.

As Programmable Automation Controllers (PAC), M1 CPUs combine flexibility, open standards and the performance of the PC / IT-world with the industrial robustness of classical PLC.

The comprehensive scope of Bachmann electronic software enables it to be used as a PLC, motion controller or communication and data centre.

Consistent compatibility of the PACs application software protects the user's investments for future expansions.

Fold out to read more about the different processor modules:

Processor Modules ME203 Series

The processor modules of the ME203 series extend the range of the M1 controller family in terms of reduced power consumption and moderate cycle times. With an extremely slim design of only one module width, ME203 CPUs offer all the essential features of larger type series but with a lower power consumption.

Several networking and power supply options scale the module ideally for smaller applications. As fullyfledged M1 CPUs, ME203 processor modules are not only configured with the same tools as the high-end families MX and MPC, but are also fully code and application compatible, although they have less memory and fewer interfaces.

All modules have two serial interfaces and a front slot for one PC card. The optional Ethernet interface allows integration in 10/100 Mbit/s networks at full data rate. With the retentive program and data storage devices, also larger projects can be handled without the need for external media. In addition to the supply of the processor module, an integrated optional power supply provides 17 W for extra I/O modules.

  • 80386 EX processor
  • 2 serial interfaces
  • Optional integrated power supply, 17 W / 24 VDC
  • Optional CAN bus interface or Ethernet 100 Mbit 100 Mbit / s interface
  • RAM 8 MB DRAM
  • Data memory 512 kB SRAM, (battery backed)
  • Integrated program memory
  • Removable memory: PC cards with 8 / 16 / 32 / 64 MB
  • Battery backed real-time clock (RTC)
  • Status display

 

See specifications for item: 

 

Available accessories for ME203 Series:

Cable CAN

 Terminal 03-pin grid

Processor Modules MC200 Series

The powerful processor modules of the MC200 series offer maximum performance for demanding applications of your M1 control system. The CPUs are based on the latest embedded ATOM technology. Consequently, they are ideally suited for the most demanding regulating tasks, process control, signal processing and complex communication protocols. Through the use of state-of-the-art technology in a robust design, a compact powerhouse with a long service life and a broad temperature range (-30 to +60 °C) is available.

The supplemental integrated, autonomous process image controller significantly offloads the processor and the I/O bus. This enables a new dimension in data transmission speed to the inputs and outputs for the fastest possible process cycles. Fast single accesses in the µs range for precise control and regulating tasks are also available. For efficient networking and state-of-the-art fieldbuses, two independent Gigabit Ethernet interfaces, including IEEE-1588 hardware support, are available. An internal CFast card enables fastest access speeds via the modern SATA (Serial Advanced Technology Attachment). Non-volatile memory of 512 kB is available as a drive and securely stores machine data for longer than 10 years, without an external energy supply or battery.

  • 2 serial interfaces
  • USB 2.0 host interface
  • USB device service interface
  • 2 Ethernet interfaces 10/100/1000 Mbit/s with IEEE 1588
  • Process image controller
  • 1 GB DRAM DDR2
  • Data memory 512 kB non-volatile
  • Internal mass storage CFast card
  • Internal 64 MB program memory

 

See specifications for item:​

 

Available accessories for MC200 Series: 

Processor Modules MX200 Series

The processor modules of the MX200 series are module based on PC technology for the M1 controller system. Depending on the type, the modules are equipped with a power supply and an integrated CAN master, and have 100 Mbit Ethernet ports that allow the simple integration of the controller in physically separated networks. The processor module with integrated floating point unit (FPU) is suitable for control applications. The MX200 modules are equipped with non-volatile RAM which provides maximum data security for more than 10 years without battery back-up.

Depending on type, the following features are:

  • 2 serial interfaces
  • 2 Ethernet-interfaces 10/100 Mbit/s with status displays
  • 1 CAN interface
  • 1 USB interface
  • Status indicating LEDs for RUN, INIT and ERROR
  • Mass storage (Compact Flash) • RAM 256 MB DRAM
  • Data memory 512 kB nvRAM
  • Program memory of 16/32/64 MB FLASH on PC card and 16 MB internal FLASH, MX207 64 MB internal FLASH
  • Integrated power supply

 

See specifications for item:

 

Available accessories for MX200 Series:

Cable CAN

 Terminal 03-pin grid