Memory Media | Robust in every detail

Source: Bachmann System Overview catalog | Bachmann electronic GmbH www.bachmann.info.

To safely satisfy the high availability requirements imposed on the entire automation system, program memory and data memory should also be selected with the utmost care. The PCC201, CF200, as well as the latest CFA200 families are specially selected industrial types that meet the special requirements imposed by the harsh everyday conditions.

Due to the extended ambient conditions, the high number of supported write cycles and the exchange of experience with suppliers these memory cards are strongly recommended for use both in the controller system as well as in the operating and monitoring devices, and in industrial PCs.

Fold out to read more about the different storage media possibilities:

PC Cards PCC201/xx

The PCC201/xx PC cards serve as a storage medium of the M1 controller. Depending on the memory extension, the PC cards may contain source codes and pieces of documentation in addition to the operating system, the drivers and the application software.

The PCC201 cards can directly be written to and formatted in all processor modules of the M1 controller. With an A-PCC200 adapter it is possible to use the PC cards in the PCMCIA slots of PCs and notebooks.

The PCC201 series is produced entirely in-house and therefore long-term supply is guaranteed.

  • Memory capacity 32 / 64 MB
  • Access width 16 bits
  • Designed as 5 V card
  • Program voltage of 12 Vss
  • Write protection via operating software

 

See specifications for item:

 

Accessories PCC201/xx: 

Compact Flash Memory CF200/xx UDMA

Given the high availability demands placed on automation systems, program and data memory must be selected with particular care. The Compact Flash memory cards CF200/xx are therefore especially selected industrial types that can cope with the requirements of harsh daily working routines.

Use of the CF200/xx both in CPUs of the M1 family and in CT and WT devices is strongly recommended due to the extreme environmental conditions, the large number of supported write cycles and the many years of lasting experience with suppliers.

  • Compact Flash type I according to Compact Flash specification
  • Memory capacity 2/4/8 GB
  • Very fast data transfer (UDMA)
  • Write protection via operating software
  • Extended temperature range
  • Long service life / MTTF

 

See specifications for item:

CFast Memory CFA200/xx

The full speed of the SATA interface is available with the CFast memory card for powerful controllers. Up to 30x the transmission rates of the CF cards can be reached. Given the high availability demands placed on automation systems, program and data memory must be selected with particular care. The CFast memory cards CFA200/xx are therefore especially selected industrial types that can cope with the requirements of harsh daily working routines.

Use of the CFA200/xx both in CPUs of the M1 family as well as in our visualization devices is strongly recommended due to the extreme environmental conditions, the large number of supported write cycles and the many years of lasting experience with suppliers. The robustness was significantly increased in comparison with a CF card via a stable edge connector.

  • CFast type I
  • Memory capacity 4/8/16 GB
  • Fast data transfer
  • Write protection via software
  • Extended temperature range
  • Long service life / MTTF

 

See specifications for item: